WaterHog Modular Tiles

Description

WaterHog Modular Tiles link together easily to provide scalable flooring solutions for large areas.  They are designed to be installed without glue or the need for professional installers.

• Clean & Dry – Bi-level surface effectively scrapes dirt and moisture from shoes, trapping it beneath shoe level to prevent tracking
• Durable – Reinforced rubber nubs prevent pile from crushing and extend the performance life of the mat
• Fade & Stain-Resistant – Solution-dyed fabric (24 ounces/square yard) is resistant to staining, dries quickly, and will not fade or rot
• Easy to Install – Tiles link together easily and are designed to be installed without glue or the need for professional installers
• Tiles are 7/16″ thick and available in 18″ or 36″ tiles with 4 color options
• Feature 200-mil SBR cleated rubber backing
• Rubber borders (sold separately) securely link to the outer perimeter of the installation

WaterHog Modular Tiles Available Sizes

18″ x 18″ x 7/16″ (10 tiles/case)
36″ x 36″ x 7/16″ (4 tiles/case)

Specifications

SURFACE
Fiber: Solution-dyed polypropylene
Weight: 24 ounces/yard²
Construction: Needle-punched
Design: Waffle pattern

BACKING
Material: SBR rubber (20% recycled content) – universal cleated
Thickness: 200-mil

OVERALL TILE THICKNESS: 7/16 inch (0.4375″)

STANDARDS & TESTING

• Passes DOC-FF1-70 for the surface flammability of carpets

Cleaning Instructions

For the best results, utilize the following cleaning method to clean your WaterHog tiles:

• Vacuum regularly (daily in high-traffic commercial areas; weekly in lower-traffic areas).
• Extract or hose off as needed to remove heavy soil/debris.  Hang to dry.

Always make sure the mat is dry before placing it back in service.

Installation Instructions

Step 1: Connect as many tiles as is required to achieve the width of the installation.

A Directional arrow is printed on the back of each tile to indicate the direction of the fabric pile. For all tiles to match, the arrows on each tile should be installed in the same direction.

Step 2: Connect as many rows of tile as is necessary to achieve the length of the installation.

Step 3: If the installation requires borders, then connect four corner borders to the installation and as many side borders as necessary to complete the installation. If heavy traffic is anticipated across a border, we recommend gluing borders in place with a solvent-free adhesive like S1500.

Note: Tiles can be installed wall to wall. Find the center point of the installation and connect tiles together in all directions toward the walls. Tiles should be cut to fit against each wall.

Manufacturer

M+A Matting

 

Additional information