Description
Switchboard Non-Conductive Matting is designed for use in high voltage areas.
Corrugated Switchboard – Designed to protect workers from electrical shock by insulating against high voltage
- Type II, Class 2 (meets additional testing for flame, oil, and ozone resistance)
- Conforms to ASTM D-178-01 testing
- Tested dielectric strength is 30,000 volts
- The maximum use voltage is 17,000 volts
- 1/4″, non-conductive
Diamond Plate Switchboard – Designed to protect workers from electrical shock by insulating against high voltage
- Type II, Class 2 (meets additional testing for flame, oil, and ozone resistance)
- Conforms to ASTM D-178-01 testing
- Tested dielectric strength is 30,000 volts
- The maximum use voltage is 17,000 volts
- 1/4″, non-conductive
Military Diamond Switchboard – Designed to protect workers in high voltage areas
- Meets strict military specification standard MIL-DTL15562G
- Type III – PVC runner
- Dielectric strength: the floor covering shall not fail at less than 30,000 volts when tested as specified – MIL-DTL15562G
- 3/16″, non-conductive
Military Smooth Switchboard – Designed to protect workers in high voltage areas
- Meets strict military specification standard MIL-DTL15562G
- Type II – PVC runner
- Dielectric strength: the floor covering shall not fail at less than 30,000 volts when tested as specified – MIL-DTL15562G
- 1/8″, non-conductive
Switchboard Non-Conductive Matting Available Sizes
Corrugated Switchboard
24″ x 75′
36″ x 75′
48″ x 75′
Diamond Plate Switchboard
36″ x 75′
Military Diamond Switchboard
36″ x 75′
Military Smooth Switchboard
36″ x 75′
Specifications
Corrugated & Diamond Plate Switchboard Matting
Material: PVC (vinyl)
Thickness: 1/4 inch (0.25″)
STANDARDS & TESTING
- Passes electrical proof test ASTM D178 (Min. 20,000 V for one minute)
- Passes dielectric breakdown test ASTM D149 (Min. 30,000 V)
- Passes O3 resistance test method B ASTM D178 (any visual degradation)
- Tensile strength ASTM D412 DIE C (Minimum 700 PSI): 1,318 PSI, PASS
- Elongation ASTM D412 DIE C (Minimum 250%): 317%, PASS
- Tension set ASTM D412 DIE B (Maximum 0.50 in.): 0.4827 in., PASS
- Moisture absorption ASTM D570 (Maximum increase 3%): 0.09%, PASS
- Accelerated aging ASTM D573 (Minimum 50% of original tensile strength): 1,363 PSI (103% of original tensile strength), PASS
- Flame resistance ASTM D178 Appendix (Maximum 0.5 in./12.7mm after 30 seconds): 0.12 mm/s, PASS
- Oil resistance ASTM D471 (Maximum volume increase 4%): 0.04%, PASS
Military Diamond Switchboard Matting
Material: PVC (vinyl)
Thickness: 3/16 inch (0.1875″)
STANDARDS & TESTING
- Voltage Test MIL-DTL-15562G, Min. 15,000V for 1 Minute, Pass
- Dielectric Strength Test MIL-DTL-15562G, Min. 30,000V, Pass
- Visual/Dimensional Exam MIL-STD-407, Any Visual Degradation, Pass
- Tensile Strength ASTM D412 DIE C, Min. 800PSI, Pass
- Ultimate Elongation ASTM D412 DIE C, Min. 75%, Pass
- Permanent Set ASTM D412, Max. 25%, Pass
- Hardness ASTM D2440, 95+/-5(Shore A), Pass
- Immersion Test FED-STD-601 Method 6121, Min. 70% of Original Tensile Strength, Pass
- Oxygen Bomb Test FED-STD-601 Method 7111, Min. 80% of Original Tensile Strength, Pass
- Light Aging ASTM D750, Min. 65% of Original Tensile Strength, Pass
- Flame Resistance MIL-STD-1623, Char Length Max. 10in. Combustion Time 4.0 Min, Pass
- Abrasion Resistance ASTM D1242, Max. Mils Lost 10, Pass
- Flexibility Test FED-STD-501 Method 3111 Shall Pass, Pass
- Dimensional Stability Test ASTM D1204, +/-0.020 IN/FT, Pass
- Gloss Test ASTM D2457, 50, Pass
- Color FED-STD-595, As Specified, Pass
Military Smooth Switchboard Matting
Material: PVC (vinyl)
Thickness: 1/8 inch (0.125″)
Cleaning Instructions
Switchboard mats can be cleaned by scrubbing with a deck brush (when needed) using detergent with a neutral pH, and rinsed with a hose or pressure washer. Mats should be laid flat or hung to dry.
Manufacturer
M+A Matting
Reviews
There are no reviews yet.