Classic Brush Mat

Description

The Classic Brush Mat features extra-course nylon fibers blended with traditional nylon carpet fibers.  This duo of fibers is designed to create excellent scraping and wiping action for maximum soil stopping power.

• Superior Dirt-Stopping Power – Course nylon fibers scrape and wipe dust and dirt from shoes
• Resilient – High-twist, heat-set nylon resists crushing to better trap dirt and extends the useful life of the mat
• Fade Resistant – Solution-dyed nylon won’t fade in sunlight or with repeated washing; impervious to bleach
• Safe – Certified high-traction by the National Floor Safety Institute (NFSI)
• When backed with nitrile rubber this mat is commercially launderable
• Available in 3 color options on SBR (48 mil) rubber with multiple backing options to ensure the mat stays in place on your floor

Classic Brush Mat Available Sizes

2′ x 3′ (24″ x 35″)
3′ x 4′ (35″ x 47″)
3′ x 5′ (35″ x 59″)
3′ x 10′ (35″ x 119″)
4′ x 6′ (45″ x 69″)
4′ x 8′ (45″ x 95″)
4′ x 10′ (45″ x 118″)
5′ x 6′ (58″ x 69″)
5′ x 10′ (58″ x 119″)
6′ x 10′ (68″ x 119″)
6′ x 12′ (68″ x 143″)

Specifications

SURFACE
Fiber: Heavy-duty 3000 denier solution-dyed type 6 nylon twisted with A916 mineral 1260 denier type nylon
Twist Level: 4.25 turns/inch
Construction: Cut pile
Weight: 26 ounces/yard²
Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 ounces/yard²)

BACKING (available with nitrile or SBR)
Material: Nitrile rubber – (smooth, universal cleated, full cleat, suction)
Thickness Options:
Medium duty 65-mil (body thickness 65-mil; border thickness 107-mil)
Heavy-duty 90-mil (body thickness 90-mil; border thickness 90-mil)

Material: SBR rubber (with 20% recycled content) – smooth or full cleated
Thickness: 48-mil (body thickness 48-mil; border thickness 90-mil)

OVERALL MAT THICKNESS: 3/8 inch (0.375″)

STANDARDS & TESTING

• Certified high traction by the National Floor Safety Institute (NFSI)

Cleaning Instructions

Classic Brush mats can be cleaned in several different ways.

• Commercially laundered (see Laundering Instructions)
• Vacuumed regularly: daily in high-traffic areas, weekly in lower-traffic applications
• Cleaned with an extractor and laid flat to dry.

Mats should always be dry before they are placed back in service and cooled before rolling.

Laundering Instructions

Classic Brush Mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue.

For heavy soil, increase the temperature to a max of 140 degrees F (60 degrees C). The break should not exceed a pH of 9.5; use low pH non-ionic detergents.

1. Flush 2-3 minutes, medium water level, 120 degrees  F (49 degrees C)
2. Flush (optional) 2-3 minutes, medium water level, 120 degrees  F (49 degrees C)
3. Break 2-3 minutes, high water level, 120 degrees  F (49 degrees C)
4. Rinse 2 minutes, high water level, cold
5. Rinse 2 minutes, high water level, cold
6. Extract (low speed) 1-2 minutes
7. Shake out (rotate the wheel at wash speed with the drain open) 1 minute
8. Extract (low speed) 3-5 minutes
9. Dry 5-10 minutes, 180 degrees  F (82 degrees  C) basket temp.
10. Cooldown 5 minutes
11. Lay mats flat following removal from washer or dryer. Allow cooling before rolling.

Do not over-dry mats; basket temperature of dryer should not exceed 180 degrees F (82 degrees C). If mats are not dried, the final rinse can be increased to 140 degrees F (60 degrees C). This will reduce moisture retention following extraction.

Manufacturer

M+A Matting

  

Additional information