Recommended for use in commercial and industrial settings that require additional slip resistance or floor protection.
2' x 3' (23" x 32")
3' x 5' (32" x 58")
3' x 9' (32" x 108")
3' x 12' (32" x 143")
4' x 6' (46" x 70")
4' x 9' (46" x 108")
4' x 12' (46" x 143")
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
CONSTRUCTION
SURFACE
Material: Solid nitrile rubber
Thickness: 1/8 inch (0.125")
STANDARDS & TESTING
Certified high-traction by the National Floor Safety Institute (NFSI)
Passes flammability standard DOC-FF1-70
ASTM C1028-96 static coefficient of friction:
Dry 0.97
Wet 0.93
ESD rating of electrically conductive:
Surface to surface at 50% relative humidity 6.2 x 10^4 ohms
Surface to surface at 12% relative humidity 1.5 x 10^5 ohms
Melt point over 500 degrees F. Tested at temperatures up to 1800 degrees F for welding/slag resistance
Traction Tread mats can be cleaned using the instructions below:
Scrubbing with a deck brush (when needed)
Using detergent with a neutral pH
Rinsing with a hose or pressure washer
Mat should be laid flat or hung to dry
Always make sure the mat is dry before placing it back in service.
