Recommended for countertop point-of-purchase applications where branding or messaging is desired along with counter-top protection and a non-slip surface for glassware.
3.5" x 21"
14" x 14"
Please note, mat size is approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
CONSTRUCTION
Material: Nitrile Rubber
Logo/Image Material: Polymetric film
Thickness: 3/16 inch (0.1875")
STANDARDS & TESTING
Passes flammability standard DOC-FF1-70
A digital print on polymetric film allows customers to customize the Bar Impressions mat with logos, images, and messages.
PMS colors may be matched for an additional fee.*
Minimum Text Height: 1/2" (includes lowercase text)
Minimum Line Thickness: 1/16"
These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
White is prone to discolor and cannot be used as the backgroundor any part of the imprint area. The product's color palette offers threelight colors to use in place of White: F5, N9 and N10. The background color of the imprint area should not be set to these light colors. It is difficult to keep the logo clean through the manufacturing process.
Powerclips in CorelDraw files must be avoided.
*We will do our best to match a PMS color, however, color matching can be extremely challenging. Although we can get close, color is never an exact science and variations will occur. An exact color match is vulnerable to many factors, including the fact that we use a hot press to combine the rubber surface and cushion backing. Heat from the press often causes the color to lighten. Typically, we can get close to most PMS colors, but the final color may be a few shades off. For the PMS color to be as close as possible, we require additional time to create the proof sketch. Specific PMS colors may be matched for a one-time additional fee of $270.38 per PMS color.
