Recommended for indoor commercial use at entryways, in lobbies, at front desks or anywhere additional traction or moisture control is needed.
2' x 3' (24" x 35")
3' x 4' (35" x 47")
3' x 5' (35" x 59")
3' x 6' (35" x 69")
3' x 8' (35" x 95")
3' x 10' (35" x 119")
4' x 6' (45" x 69")
4' x 8' (45" x 95")
4' x 10' (45" x 118")
5' x 8' (58" x 95")
5' x 10' (58" x 119")
5' x 12' (58" x 143")
6' x 8' (68" x 95")
6' x 10' (68" x 119")
6' x 12' (68" x 143")
Custom sizes are available in widths of 3' (35"), 4' (45"), 5' (58"), and 6' (68") with lengths up to 40'.
Please note, mat size is approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
SURFACE
Material: PET (polyethylene terephthalate) printed/disperse-dyed yarn
Weight: 23 ounces/yard2
Construction: Cut pile
Substrate: Freudenberg LUTRADUR® polyester spunbond non-woven fabric (3.8 ounces/yard2)
BACKING OPTIONS
Material: Nitrile rubber - smooth, universal cleated or suction
Thickness Options:
Standard duty 52-mil (body thickness 52-mil; border thickness 94-mil)
Medium duty 65-mil (body thickness 65-mil; border thickness 107-mil)
Heavy duty 90-mil (body thickness 90-mil; border thickness 90-mil)
Material: SBR rubber - smooth or full cleated
Thickness: 48-mil (body thickness 48-mil; border thickness 90-mil)
Overall Mat Thickness: 3/8 inch (0.375")
STANDARDS & TESTING
Certified high-traction by the National Floor Safety Institute (NFSI)
Passes flammability standard DOC FF1-70
ESD rating of anti-static:
Surface to surface at 50% relative humidity 5.7 x 10^11
Surface to surface at 12% relative humidity 4.9 x 10^11
ColorStar mats can be cleaned in several different ways:
They can be commercially laundered (see Laundering Instructions)
Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
Cleaned with an extractor, or hosed off as necessary to remove heavy soil
Hang mat to dry
Mats should always be dry before they are placed back in service.
ColorStar mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue. ColorStar mats are manufactured using PET Yarn. PET is a type of polyester that needs to be processed using the proper chemistry to obtain optimal results. When PET products are exposed to oils, the yarn has an affinity to retain these oils. We would recommend starting with 2 oz. of detergent per cwt., and 1 oz. of alkali per cwt. The level of chemicals required will depend on the type of accounts you service. Please consult with your chemical supplier if you have additional questions or concerns.
Flush 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
Flush (optional) 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
Break 5-10 minutes, high water level, 120 degrees F (49? degrees C)
Rinse 2 minutes, high water level, cold
Rinse 2 minutes, high water level, cold
Extract (low speed) 1-2 minutes
Shake out (rotate wheel at wash speed with drain open) 1 minute
Extract (high speed max - 250 Gs) 3-5 minutes
Dry 5-10 minutes, 180 degrees F (82 degrees C) basket temp.
Cool down 5 minutes
Lay mats flat following removal from washer or dryer. Allow to cool before rolling.
For heavy soil mats, increase temperature to max 140 degrees F (60 degrees C).Break should not exceed pH of 9.5; use low pH non-ionic detergents. Do not over-dry mats; basket temperature of dryer should not exceed 180 degrees F (82 degrees C).If mats are not dried, final rinse can be increased to 140 degrees F (60 degrees C). This will reduce moisture retention following extraction.
