18" x 18" x 7/16" (10 tiles/case)
36" x 36" x 7/16" (4 tiles/case)
SURFACE
Material: Solution-dyed polypropylene
Weight: 24 ounces/yard2
Construction: Needle-punched
Design: Waffle pattern
BACKING
Material: SBR rubber - universal cleated
Thickness: 200-mil
Overall Tile Thickness: 7/16 inch (0.4375")
STANDARDS & TESTING
Passes DOC-FF1-70 for the surface flammability of carpets
WaterHog Modular Tile mats can be cleaned using the following instructions:
Vacuum regularly (daily in high-traffic commercial areas; weekly in lower-traffic areas)
Extract or hose off as needed to remove heavy soil/debris
Hang mat to dry
Always make sure the mat is dry before placing it back in service.
Step 1: Connect as many tiles as is required to achieve the width of the installation.
A Directional arrow is printed on the back of each tile to indicate the direction of the fabric pile. For all tiles to match, the arrows on each tile should be installed in the same direction.
Step 2: Connect as many rows of tile as is necessary to achieve the length of the installation.
Step 3: If installation requires borders, then connect four corner borders to the installation and as many side borders as necessary to complete the installation. If heavy traffic is anticipated across a border, we recommend gluing borders in place with a solvent free adhesive like S1500.
Note: Tiles can be installed wall to wall. Find the center point of the installation and connect tiles together in all directions toward the walls. Tiles should be cut to fit against each wall.
