Plush Mat

Description

The Plush Mat features a thick, plush carpet pile designed to absorb more moisture than standard mats.

• Superior Moisture & Dust Control – Heavier carpet pile absorbs and retains 50% more moisture and dust than standard mats
• Resilient – High-twist, heat-set nylon resists crushing to better trap dirt and extends the useful life of the mat
• Fade Resistant – Solution-dyed nylon won’t fade in sunlight or with repeated washing; impervious to bleach
• Safe – Certified high-traction by the National Floor Safety Institute (NFSI)
• Commercially launderable
• Available in 8 color options on durable 90-mil nitrile rubber with multiple backing options (smooth, cleated, or suction) to ensure the mat stays in place on your floor

Plush Mat Recommended Uses

Recommended for indoor use at commercial entryways, in lobbies, or any interior location where additional traction or moisture control is needed.

Available Sizes

2′ x 3′ (24″ x 35″)
2.5′ x 3′ (30″ x 35″)
2.5′ x 4′ (30″ x 45″)
3′ x 4′ (35″ x 47″)
3′ x 5′ (35″ x 59″)
3′ x 10′ (35″ x 118″)
4′ x 6′ (45″ x 69″)
4′ x 8′ (45″ x 95″)
5′ x 8′ (58″ x 95″)
5′ x 10′ (58″ x 119″)
5′ x 12′ (58″ x 143″)
6′ x 10′ (68″ x 119″)
6′ x 12′ (68″ x 143″)

Available in custom sizes with widths of 3′ (35″), 4′ (45″), 5′ (58″), and 6′ (68″) and lengths up to 40′.

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time.  Tolerable manufacturing size variance is 3-5%.

Specifications

SURFACE
Material: Solution-dyed type 6 nylon
Construction: Cut pile
Weight: 36 ounces/yard²
Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 ounces/yard²)

BACKING
Material: Nitrile rubber (available with smooth, universal cleated, full cleat, or suction)
Thickness: Heavy-duty 90-mil (body thickness 90-mil; border thickness 90-mil)

OVERALL MAT THICKNESS: 3/8 inch (0.375″)

STANDARDS & TESTING

• Certified high traction by the National Floor Safety Institute (NFSI)

Cleaning Instructions

Plush mats can be cleaned in several different ways.

• They can be commercially laundered (see Laundering Instructions)
• Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
• Cleaned with an extractor and laid flat to dry.

Mats should always be dry before they are placed back in service and cooled before rolling.

Laundering Instructions

Plush mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue.  For heavy soil, increase the temperature to a max of 140 degrees F (60 degrees C).  The break should not exceed pH of 9.5; use low pH non-ionic detergents.

1. Flush 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
2. Flush (optional) 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
3. Break 2-3 minutes, high water level, 120 degrees F (49 degrees C)
4. Rinse 2 minutes, high water level, cold
5. Rinse 2 minutes, high water level, cold
6. Extract (low speed) 1-2 minutes
7. Shake out (rotate the wheel at wash speed with the drain open) 1 minute
8. Extract (low speed) 3-5 minutes
9. Dry 5-10 minutes, 180 degrees F (82 degrees C) basket temp.
10. Cooldown for 5 minutes.
11. Lay mats flat following removal from washer or dryer. Allow cooling before rolling.

Do not over-dry mats; basket temperature of dryer should not exceed 180 degrees F (82 degrees C).
If mats are not dried, the final rinse can be increased to 140 degrees F (60 degrees C). This will reduce moisture retention following extraction.

Manufacturer

M+A Matting

  

Additional information