Hog Heaven Electrically Conductive Anti-Fatigue Mat

Description

The Hog Heaven Electrically Conductive Anti-Fatigue Mat is designed for use in electrically sensitive environments.

• Electrically Conductive – Nitrile rubber surface is electrically conductive to quickly drain static electricity to help protect sensitive equipment from damage
• Comfortable – High-density nitrile-blended cushion helps eliminate pressure to the lower back and legs, providing superior comfort
• Safe – Certified high-traction by the National Floor Safety Institute (NFSI); sloped edges provide a safe transition from floor to mat
• Durable – Nitrile-blended cushion provides years of useful service life; cushion is molded, not glued, to the nitrile rubber surface so it will not separate; edges will not crack or curl
• Versatile – Welding safe; ESD rating of electrically conductive; chemical resistant; the surface is grease/oil proof and the cushion is grease/oil resistant
• Available in 5/8″ or 7/8″ thicknesses with solid black or with OSHA-approved caution yellow borders on two sides
• Includes ground wire and snap

Hog Heaven Electrically Conductive Anti-Fatigue Mat Recommended Uses

Recommended for indoor use in static-sensitive environments where an electrically conductive mat is necessary to protect sensitive equipment or products.

Available Sizes

3′ x 5′ (32″ x 58″)
4′ x 6′ (46″ x 70″)

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

Specifications

SURFACE
Material: Nitrile rubber

CUSHION
Material: High-density, closed-cell nitrile/PVC-blended foam

OVERALL MAT THICKNESS: 5/8 inch (0.6250″ ) or 7/8 inch (0.8750″) depending on the product selected

STANDARDS & TESTING

• Durometer: 56
• Compression Deflection:
  5/8″ Mat: 47.8% at 20 psi; 66.0% at 40 psi
  7/8″ Mat: 51.0% at 20 psi; 66.0% at 40 psi
• Certified high traction by the National Floor Safety Institute (NFSI)
• Passes flammability standard DOC-FF1-70
• ASTM C1028-96 static coefficient of friction:
  Dry 0.87
  Wet 0.85
• ESD rating of electrically conductive:
  Surface to surface at 50% relative humidity 2.6 x 10^5 ohms
  Surface to surface at 12% relative humidity 3.0 x 10^5 ohms
• Meets requirements for ASTM/ESD S20.20 and ASTM/ESD S7.1
• Melt point over 500 degrees F. Tested at temperatures up to 1800 degrees F for welding/slag resistance (specific results from test available upon request)

Cleaning Instructions

Hog Heaven mats can be cleaned by scrubbing with a deck brush (when needed), using detergent with a neutral pH, and rinsing with a hose or pressure washer.  Mats should be laid flat or hung to dry.

Manufacturer

M+A Matting

 

Additional information