See our Restroom Mats as an alternative.
Recommended for commercial use in bathrooms and restrooms
Sink Mat - 3' x 5'
Commode Mat - 22" x 22"
Urinal Mat - 20" x 17"
SURFACE
Material: Needle-punched, solution-dyed PET
Weight: 14 ounces/yard2
Pattern: Waffle
BACKING
Material: SBR rubber
Thickness: 68-mil
Overall Mat Thickness: 3/16 inch (0.1875")
STANDARDS & TESTING
Passes flammability standard CPSC FF 1-70
Proper laundering will prolong the service life of Restroom Services mats by preventing the buildup of soil and soap residue. It may be necessary to adjust the formula shown below to increase break time, temperature, or number of rinses to achieve desired results. For sanitary purposes we recommend the break temperature be maintained at 140 degrees. Do not wash Restroom Services mats with cleated general-use mats as this may cause pilling of the fabric surface.
Flush 2-3 minutes, high water level, 120 degrees F (49 degrees C)
Flush 2-3 minutes, high water level, 120 degrees F (49 degrees C)
Break 5-10 minutes, high water level, 140 degrees F (60 degrees C)
Rinse 2 minutes, high water level, cold
Rinse 2 minutes, high water level, cold
Lay mats flat nap side down following removal from the washer. This will allow any water in the mats to drain out. When dry roll mats nap out for delivery.
Drying is normally not necessary. If there is excess lint on the carpet, simply tumble the mats for 5 minutes using the cool down cycle. No heat is necessary.
Do not use high pH detergents, alkali or solvents. The break should not exceed a pH of 9.5. Use a low pH non-ionic detergent. 2-4 oz./ 100# of mats. Consult with your chemical supplier for exact amounts.
