Recommended for indoor commercial use at entryways, in lobbies, at front desks or anywhere you want to display your company logo, slogan, artwork, or message to customers/visitors or employees.
2' x 3' (24" x 35")
3' x 4' (35" x 45")
3' x 5' (35" x 59")
3' x 10' (35" x 119")
4' x 6' (45" x 69")
4' x 8' (45" x 95")
5' x 8' (58" x 95")
5' x 10' (58" x 119")
6' x 10' (68" x 119")
6' x 12' (68" x 143")
Special sizes available in widths of 3' (35"), 4' (45"), 5' (58"), or 6' (68") and lengths up to 40'.
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
SURFACE
Material: Acid-dyed type 6,6 nylon
Construction: Cut pile
Weight: 32 ounces/yard2
Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 ounces/yard2)
BACKING OPTIONS
Material: Nitrile rubber - smooth, universal cleated, full cleated, or suction
Thickness Options:
Standard 52-mil (body thickness 52-mil; border thickness 94-mil)
Medium duty 65-mil (body thickness 65-mil; border thickness 107-mil)
Heavy duty 90-mil (body thickness 90-mil; border thickness 90-mil)
Material: SBR rubber - smooth, universal cleated, full cleated, or suction
Thickness: 48-mil - body thickness 48-mil; border thickness 90-mil
Overall Mat Thickness: 3/8 inch (0.375")
STANDARDS & TESTING
Passes standard for the surface flammability of carpets and rugs DOC-FF1-70
Classic Impressions HD logo mats are produced using a layering process of color. Colors are typically matched to our standard pallet of 150 colors unless a specific coated PMS color is requested*.
Minimum Text Height: 1" for serif fonts and 1/2" for sans serif fonts
Minimum Line Thickness: 1/8" except for white & light colors which should be at least 1/4"
These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
Light background colors should be avoided due to their tendency to show dirt on the mat more than a darker or neutral tone. We also advise against the use of screens, tints, and transparencies in the design because they are not easily converted to our color palette.
Mat Size Maximum Imprint Area
2' x 3' (24" x 35") 24" x 35"
3' x 4' (35" x 47") 35" x 47"
3' x 5' (35" x 59") 35" x 59"
3' x 10' (35" x 119") 35" x 119"
4' x 6' (45" x 69") 45" x 69"
4' x 8' (45" x 95") 45" x 95"
5' x 8' (59" x 95") 59" x 95"
5' x 10' (59" x 119") 59" x 119"
6' x 10' (69" x 119") 69" x 119"
6' x 12' (69" x 143") 69" x 143"
*We will do our best to match a PMS color, however, color matching can be extremely challenging. Although we can get close, color is never an exact science and variations will occur . An exact color match is vulnerable to many factors. One factor is that we are printing on white nylon carpet. Another factor is that we use a hot press to combine the carpet and rubber backing. Heat from the press often causes the color to lighten. Typically, we can get close to most PMS colors, but the final color may be a few shades off. For the PMS color to be as close as possible, we require additional time to create the proof sketch. Specific PMS colors may be matched for a one-time additional fee.
Classic Impressions HD mats can be cleaned using the instructions below:
Vacuum regularly (daily in high-traffic commercial areas; weekly in lower traffic areas)
Extract or hose off as needed to remove heavy soil/debris
Hang mat to dry
Always make sure the mat is dry before placing it back in service.
Classic Impressions HD mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue.
Flush 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
Flush (optional) 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
Break 5-10 minutes, high water level, 120 degrees F (49 degrees C)
Rinse 2 minutes, high water level, cold
Rinse 2 minutes, high water level, cold
Extract (low speed) 1-2 minutes
Shake out (rotate wheel at wash speed with drain open) 1 minute
Extract (high speed max - 250 Gs) 3-5 minutes
Dry 5-10 minutes, 180 degrees F (82 degrees C) basket temp.
Cool down 5 minutes
Lay mats flat following removal from washer or dryer. Allow to cool before rolling.
