2' x 3' (22" x 34")
2.5' x 3' (30" x 35")
3' x 4' (34" x 46")
3' x 5' (34" x 58")
3' x 8' (34" x 94")
3' x 10' (34" x 118")
4' x 6' (46" x 69")
Available in custom sizes with widths of 3' (34") and lengths up to 117"; and with widths of 4' (46") and lengths up to 93" long.
Please note, mat size is approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
CONSTRUCTION
Material: Nitrile rubber
Logo/Image Material: Polymeric film
Overall Mat Thickness: 3/16 inch (0.1875" )
STANDARDS & TESTING
Passes flammability standard DOC-FF1-70
Floor Impressions are all rubber mats that feature a digital imprint. A digital imprint allows for much more detail; and bright, vivid colors can be easily achieved. PMS colors may be matched for an additional fee.*
Minimum Text Height: 1/4" for diamond top and 1/8" for smooth top (includes lowercase text)
Minimum Line Thickness: 1/16"
These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
White is prone to discolor and cannot be used as the background or any part of the imprint area. The product's color palette offers three light colors to use in place of White: F5, N9 and N10. The background color of the imprint area should not be set to these light colors. It is difficult to keep the logo clean through the manufacturing process.
Solid color designs are not available and cannot be produced. The print area must be comprised of text and/or logo.
Mat Size Imprint Area
2' x 3' (22" x 34") 21" x 33"
2.5' x 3' (28" x 34") 27" x 33"
3' x 4' (34" x 46") 33" x 45"
3' x 5' (34" x 58") 33" x 57"
3' x 8' (34" x 94") 33" x 93"
3' x 10' (34" x 118") 33" x 117"
4' x 6' (46" x 69") 45" x 68"
3' (34") width 33" x up to 117"
4' (46") width 45" x up to 93"
*We will do our best to match a PMS color, however, color matching can be extremely challenging. Although we can get close, color is never an exact science and variations will occur. An exact color match is vulnerable to many factors, including the fact that we use a hot press to combine the rubber surface and cushion backing. Heat from the press often causes the color to lighten. Typically, we can get close to most PMS colors, but the final color may be a few shades off. For the PMS color to be as close as possible, we require additional time to create the proof sketch. Specific PMS colors may be matched for a one-time additional fee. A maximum of 4 PMS colors may be used in any given design.
Floor Impressions mats can be cleaned by using detergent with a neutral pH, and rinsing with a hose. Mats should be laid flat or hung mat to dry.
Always make sure the mat is dry before placing it back in service.
