Recommended for indoor use in commercial and industrial settings where branding or messaging is required/preferred along with the anti-fatigue benefits of a Hog Heaven mat. Excellent for customization with a company logo, slogan, or safety and quality reminders.
2' x 3' (23" x 33")
3' x 5' (32" x 58")
4' x 6' (46" x 69")
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
SURFACE
Material: Nitrile rubber
Logo/Image Material: Polymeric film
CUSHION
Material: High-density, closed-cell nitrile/PVC-blended foam
Overall Mat Thickness: 5/8 inch (0.6250" )
STANDARDS & TESTING
Durometer: 56
Compression Deflection:
47.8% at 20 psi
61.6.0% at 40 psi
Certified high-traction by the National Floor Safety Institute (NFSI)
Passes flammability standard DOC-FF1-70
Melt point over 500 degrees F. Tested at temperatures up to 1800 degrees F for welding/slag resistance (specific results from test available upon request)
A digital print on polymetric film allows customers to customize the Hog Heaven anti-fatigue mat with logos, images, and messages. PMS colors may be matched for an additional one-time fee.*
Minimum Text Height: 1/4"
Minimum Line Thickness: 1/16"
These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
White is prone to discolor and cannot be used as the background or any part of the imprint area. The product's color palette offers three light colors to use in place of White: F5, N9 and N10. The background color of the imprint area should not be set to these light colors. It is difficult to keep the logo clean through the manufacturing process.
Mat Size Maximum Imprint Area
2' x 3' (24" x 32") 12" x 22"
3' x 5' (32" x 58") 24" x 44"
4' x 6' (46" x 70") 36" x 50"
*We will do our best to match a PMS color, however, color matching can be extremely challenging. Although we can get close, color is never an exact science and variations will occur. An exact color match is vulnerable to many factors, including the fact that we use a hot press to combine the rubber surface and cushion backing. Heat from the press often causes the color to lighten. Typically, we can get close to most PMS colors, but the final color may be a few shades off. For the PMS color to be as close as possible, we require additional time to create the proof sketch. Specific PMS colors may be matched for a one-time additional fee.
Hog Heaven Impression mats can be cleaned by using detergent with a neutral pH and rinsing with a hose. Mats should be laid flat or hung to dry.
Always make sure the mat is dry before placing it back in service.
