Recommended for indoor use in static-sensitive environments where an electrically conductive mat is necessary to protect sensitive equipment or products.
3' x 5' (32" x 58")
4' x 6' (46" x 69")
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
SURFACE
Material: Nitrile rubber
CUSHION
Material: High-density, closed-cell nitrile/PVC-blended foam
Overall Mat Thickness: 5/8 inch (0.6250" ) or 7/8 inch (0.8750") depending on the product selected
STANDARDS & TESTING
Durometer: 56
Compression Deflection:
5/8" Mat: 47.8% at 20 psi; 61.6.0% at 40 psi
7/8" Mat: 51.0% at 20 psi; 66.0% at 40 psi
Certified high-traction by the National Floor Safety Institute (NFSI)
Passes flammability standard DOC-FF1-70
ASTM C1028-96 static coefficient of friction:
Dry 0.87
Wet 0.85
5/8" Mat ESD rating of electrically conductive:
Surface to surface at 50% relative humidity 3.0 x 10^5 ohms
Surface to surface at 12% relative humidity 3.5 x 10^5 ohms
7/8" Mat ESD rating of electrically conductive: Surface to surface at 50% relative humidity 3.3 x 10^5 ohms
Surface to surface at 12% relative humidity 3.8 x 10^5 ohms
Meets requirements for ASTM/ESD S20.20 and ASTM/ESD S7.1
Melt point over 500 degrees F. Tested at temperatures up to 1800 degrees F for welding/slag resistance (specific results from test available upon request)
Hog Heaven Electrically Conductive mats can be cleaned using the instructions below:
Scrub with a deck brush (as needed) using a detergent with a neutral pH
Rinse with a hose or pressure washer
Hang to dry
Mats should always be dry before they are placed back in service.
