Recommended for use in wet or dry industrial settings, Happy Feet mats are especially popular for use over grates thanks to their extra-sturdy construction.
2' x 3' (24" x 35")
3' x 5' (35" x 59")
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
SURFACE (surface encapsulates the entire cushion)
Material: Nitrile rubber
CUSHION
Material: Natural rubber
Thickness: 3/8 inch
Density: 18-20 pounds per cubic foot
Overall Mat Thickness: 1/2 inch (0.5")
STANDARDS & TESTING
Certified high-traction by the National Floor Safety Institute (NFSI)
Passes flammability standard CPSC-FF1-70
Passes flammability standard BS-4790 Metal nut Method
Compression Deflection:
32.2% at 20 psi
44.9% at 40 psi
ASTM E303 British Pendulum Test
Textured Surface BPN
Dry 88
Wet 34
Grip Surface BPN
Dry 105
Wet 82
ESD rating of electrically conductive:
Surface to surface at 50% relative humidity 1.9 x 10^4
Surface to surface at 12% relative humidity 2.0 x 10^4
Happy Feet mats can be cleaned in two different ways. They can be sterilized in an autoclave* or washed by hand using the following instructions:
Scrub with a deck brush (as needed) using a detergent with a neutral pH
Rinse with a hose or pressure washer
Hang to dry
Always make sure the mat is dry before placing it back in service.
*Please note, autoclave sterilization is not recommended for the grip surface mat.
