Complete Comfort Mat

Recommended for use in commercial and industrial settings (dry or damp).

2' x 3' (24" x 36")
3' x 4' (36" x 48")
3' x 5' (36" x 60")
3' x 10' (36" x 120")
4' x 6' (48" x 72")
4' x 8' (48" x 96")

Available in custom sizes with widths of 3' (36"), 4' (48") and whole foot lengths up to 75'.

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

CONSTRUCTION
Material: Closed-cell nitrile/PVC-blended foam
Thickness: 5/8 inch (0.625")

STANDARDS & TESTING

• Certified high-traction by the National Floor Safety Institute (NFSI)

• Passes flammability standard DOC-FF1-70

• Compression Deflection:
        49.3% at 20 psi
        64.8% at 40 psi

• ASTM C1028-96 static coefficient of friction:
       Dry 0.80
       Wet 0.80

• EN 13893 dynamic coefficient of friction:
       Traverse 1.18
       Cross 1.14

Complete Comfort mats can be cleaned in several different ways:

• Commercially laundered (see Laundering Instructions)

• Washed by hand using the following instructions:  Scrub with a deck brush (as needed), using a detergent with a neutral pH; rinse with a hose or pressure washer

• Rinse with a hose or pressure washer

• Hang to dry

Always make sure the mat is dry before placing it back in service.

Complete Comfort mats can be commercially laundered to remove oil, grease, and soil. The formula below does not require extensive mechanical action or drying; it is designed to dissolve grease residue by using hot water to emulsify oils and grease.  Complete Comfort mats do not require extracting or drying. 

1. Flush 2-3 minutes, high water level, cold water

2. Break 5-10 minutes, high water level, 140 degrees F (60 degrees C)

3. Rinse 2 minutes, high water level, cold water

4. Rinse 2 minutes, high water level, cold water

5. Drain 2 minutes

6. Lay mats flat following removal from washer. Allow to cool before rolling.