Recommended for use in commercial and industrial settings
2' x 3' (23" x 34")
3' x 5' (34" x 56")
3' x 9' (34" x 109")
4' x 6' (42" x 68")
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
CONSTRUCTION
Material: High-density, closed cell nitrile rubber foam
Thickness: 3/8 inch (0.375")
STANDARDS & TESTING
Compression Deflection:
43.8% at 20 psi
55.7% at 40 psi
Certified high-traction by the National Floor Safety Institute (NFSI)
Passes flammability standard DOC-FF1-70
ASTM C1028-96 static coefficient of friction:
Dry 1.00
Wet 0.91
Passes fungal resistance standard ASTM G21
ESD rating of static dissipative:
Surface to surface at 50% relative humidity 2.0 X 10^9 ohms
Surface to surface at 12% relative humidity 2.5 x 10^9 ohms
Comfort Scrape mats can be cleaned in several different ways:
Commercially laundered (see Laundering Instructions)
Sterilized in an autoclave
Washed by hand using the following instructions: Scrub with a deck brush (as needed), using a detergent with a neutral pH; rinse with a hose or pressure washer
Hang to dry
Always make sure the mat is dry before placing it back in service.
Comfort Scrape mats can be commercially laundered to remove oil, grease, and soil. The formula below does not require extensive mechanical action or drying; it is designed to dissolve grease residue by using hot water to emulsify oils and grease.
Flush 2-3 minutes, high water level, 120 degrees F (49 degrees C)
Break 5-10 minutes, high water level, 140 degrees F (60 degrees C)
Rinse 2 minutes, high water level, 120 degrees F (49 degrees C)
Rinse 2 minutes, high water level, cold
Lay mats flat following removal from washer. Allow to cool before rolling.
