Complete Comfort Mat

Description

The Complete Comfort Mat is an ergonomically superior anti-fatigue mat designed for dry or damp environments.

• Comfortable – 5/8″ thick nitrile/PVC-blended foam provides superior anti-fatigue properties
• Clean – Anti-microbial treatment provides lifetime protection from odors and degradation
• Safe – Beveled edges provide a safe transition from floor to mat; certified high traction by the National Floor Safety Institute (NFSI)
• Easy to Clean – Lightweight and flexible for easy handling and cleaning
• Grease and oil resistant; chemical resistant
• Available with drainage holes for use in damp areas

Complete Comfort Mat Recommended Uses

Recommended for use in commercial and industrial settings (dry or damp).

Available Sizes

2′ x 3′ (24″ x 36″)
3′ x 4′ (36″ x 48″)
3′ x 5′ (36″ x 60″)
3′ x 10′ (36″ x 120″)
4′ x 6′ (48″ x 72″)
4′ x 8′ (48″ x 96″)

Available in custom sizes with widths of 3′ (36″), 4′ (48″) and whole foot lengths up to 75′.

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

Specifications

CONSTRUCTION
Material: Closed-cell nitrile/PVC-blended foam
Thickness: 5/8 inch (0.625″)

STANDARDS & TESTING

• Certified high-traction by the National Floor Safety Institute (NFSI)
• Passes flammability standard DOC-FF1-70
• Compression Deflection:
  49.3% at 20 psi
  64.8% at 40 psi
• ASTM C1028-96 static coefficient of friction:
  Dry 0.80
  Wet 0.80
• EN 13893 dynamic coefficient of friction:
  Traverse 1.18
  Cross 1.14

Cleaning Instructions

Complete Comfort mats can be cleaned in two different ways. They can be commercially laundered (see Laundering Instructions) or washed by hand using the following instructions:

1. Scrub with a deck brush (as needed) using a detergent with a neutral pH.
2. Rinse with a hose or pressure washer.
3. Hang to dry.

Laundering Instructions

Complete Comfort mats can be commercially laundered to remove oil, grease, and soil. The formula below does not require extensive mechanical action or drying; it is designed to dissolve grease residue by using hot water to emulsify oils and grease.  Complete Comfort mats do not require extracting or drying.

1. Flush 2-3 minutes, high water level, cold water
2. Break 5-10 minutes, high water level, 140 degrees F (60 degrees C)
3. Rinse 2 minutes, high water level, cold water
4. Rinse 2 minutes, high water level, cold water
5. Drain 2 minutes
6. Lay mats flat following removal from washer. Allow to cool before rolling.

Manufacturer

  

Additional information