Price range: $98.95 through $159.95
WaterHog CleanShield Stride Inserts are replacement adhesive pads for the CleanShield Stride contamination control system. Each insert contains 60 numbered peel-off layers that capture fine dirt and dust particles. When the top layer is soiled, peel it away to reveal a fresh adhesive surface. Two sizes available to match your frame size. Made by M+A Matting.
Keep your CleanShield Stride contamination control system working at peak effectiveness with replacement adhesive inserts. These 60-layer pads are the second stage of the two-stage dirt removal system, capturing fine particles that pass through the WaterHog mat portion.
The CleanShield Stride system uses a two-stage approach: the WaterHog mat scrapes and traps larger debris, then the adhesive insert captures remaining fine particles as visitors take their second step.
Each insert pad contains 60 numbered layers of tacky adhesive film. When the top layer becomes soiled with dust, dirt, or debris:
The numbered layers let you track usage and plan replacement orders before you run out.
This product is the adhesive insert pads only. The rubber frame and WaterHog mat are sold separately.
→ WaterHog CleanShield Stride Mat — Complete system with frame and WaterHog mat
| Insert Size | Use With Frame Size |
|---|---|
| 24″ x 30″ | 26.5″ x 63.5″ frame |
| 34″ x 44″ | 36.5″ x 92.5″ frame |
Order the correct size for your frame. Inserts are not interchangeable between frame sizes.
| Attribute | Specification |
|---|---|
| Material | LDPE (low density polyethylene) |
| Thickness per Layer | 1.77 mil (0.045 mm) |
| Layers per Pad | 60 numbered layers |
| Sizes | 24″ x 30″, 34″ x 44″ |
| Manufacturer | M+A Matting |
Insert replacement frequency depends on traffic volume and contamination levels:
| Traffic Level | Approximate Layer Usage | Pad Duration |
|---|---|---|
| Light (under 50 entries/day) | 1-2 layers/week | 30-60 weeks |
| Moderate (50-200 entries/day) | 1 layer/day | ~2 months |
| Heavy (200+ entries/day) | 2-3 layers/day | 3-4 weeks |
Tip: Track layer numbers weekly to establish your facility’s usage pattern and set up a reorder schedule.
The CleanShield Stride system with adhesive inserts is designed for environments sensitive to dirt and dust contamination:
Which size insert do I need?
Check your frame size and order the matching insert size.
How often do I need to peel a layer?
It depends on traffic and contamination levels. High-traffic areas may require daily or even multiple daily layer changes. Lower-traffic areas might go a week or more between changes. The numbered layers help you track your usage pattern.
How do I know when to reorder?
Watch the layer numbers as you peel. When you’re down to 10-15 layers remaining, place your reorder to ensure continuous coverage.
Can I reuse the adhesive layers?
No. Once a layer is soiled and peeled off, it should be discarded. The adhesive is designed for single use.
What do I do with used layers?
Dispose of used layers according to your facility’s waste protocols. The LDPE material is generally suitable for standard waste disposal, but check your facility requirements.
Do the inserts work without the WaterHog mat?
The inserts are designed to work as part of the two-stage CleanShield Stride system. The WaterHog mat removes larger debris first, allowing the adhesive insert to focus on fine particles. Using inserts alone would cause them to soil much faster and reduce overall effectiveness.
Can I use these inserts with a different mat system?
These inserts are sized specifically for the CleanShield Stride rubber frame. They may not fit properly in other systems.
How should I store extra insert pads?
Store flat in original packaging, in a cool dry location away from direct sunlight and temperature extremes.
Required Frame System: → WaterHog CleanShield Stride Mat — Complete frame with WaterHog mat (inserts not included)
| Weight | 4 lbs |
|---|---|
| Dimensions | 30 × 24 × 4 in |
| Clean Stride Mat Adhesive Inserts Size | 24" x 30", 34" x 44" |
Reviews
There are no reviews yet.